I’m sure you have seen some smart homes in the movies, hotels, or even at a friend’s place and have written it off as something too expensive or something only the rich can afford. Well, nothing can be further from the truth, smart homes don’t necessarily have to be expensive, and even though they are a bit pricier than the conventional way of building, the cost you are going to save in the long run will be very much worth it. And I mean in all ramifications like energy cost, temperature control, ventilation, and insect infestations. It is no wonder that homes for sale in Hilton Head SC are being bought up by the minute. That is why we are going to be discussing why these houses are becoming a hotcake in the real estate environment.
Energy audit
This is the process of finding out problems and recommending improvements to reduce a house’s energy consumption. This can basically be carried out in two ways. We have the traditional or analogue method and the conventional or digital method. The analogue method involves two to four hours of a walkthrough, in which the auditor takes notes, photographs, and makes a visual inspection, and then records the size of the building and the assumed efficiency of the insulation.
While the digital method takes up five to 7hours, in which the auditor does a walkthrough but doesn’t stop there. The auditor uses diagnostic equipment to ascertain and record the energy consumption of the house and several shortcomings.
You’d be surprised at the extent at which your home is running an energy deficit, and this is usually caused by the various amount of leaks. Most, if not all, smart homes undergo energy audits after building, which most homeowners don’t even care to do—mostly because of the additional cost. And this gives a smart home an edge or an advantage over other houses.
Errors in the construction sequence
Many people are of the opinion that windows and doors are the major culprits when it comes to house leaks, which is not surprising considering they are the ones with the most visible holes. But the truth is that windows and doors are relatively tiny holes. In practice, the major holes occur in places that are not visible, usually where one subcontractor’s work ends and another begins; behind the drywall, up in the attic, or down in the crawlspace.
But with energy homes, this is usually not the case, as every stage of the building process are carefully structured and intricately planed to avoid such overlapping gap in structural errors. The gaps between subcontractors’ responsibilities usually translate into gaps in a house thermal boundary—which are obviously addressed in the new building codes, and you might be asking—what are inspectors there for? But the reality is that inspectors can’t always offer protection, because it’s either they don’t understand it or for some reason don’t enforce the codes. Smart houses, on the other hand, takes into account every tiny detail, because everything has to be precise and pristine for it to pass as a smart home.
Smart homes have upgraded mechanical systems
An old boiler or furnace is usually the worst energy consumer in an old house. Many houses still have old coal-powered boilers that were converted to gas or oil. These units are power-horses but use a lot of energy. Intelligent houses normally come with new boilers, with a central system that has all its ductwork placed and conditioned properly. You will even find that some of these modern houses have a solar water heating system in which the tank is coupled with the boiler to increase energy efficiency.
Modern houses have their crawlspaces inside the house
Warm, dry basement and crawlspaces can extend living and storage space. Wet basements are the source of high humidity levels and discomfort in the summertime in old houses. Not only that, they are most often times responsible for mould growth that gets distributed around the house. That is why it is a viable option to have your crawlspaces inside the house and to keep it warm and dry.
TIP:- spray foam is a fast and efficient way to bring these areas into the conditioned space while sealing the leaks between the foundation and floor framing
Air sealed and super-insulated roof
If there is an air leakage at the bottom of the house, there is also every likelihood that there will be leakage at the top, which inevitably makes the house drafty and cold during winter. Likewise, a poorly insulated roof also can make a house very hot in the summer. Air sealing is a by-product of good insulation, so it’s basically a one-step process. Using a spray foam under a roof also can eliminate the need for roof venting, which is tricky in complicated roofs.
Better energy star fixtures, appliances and lighting
The one thing smart houses have going for them is that apart from precautionary installation made to condition the space within the house in correlation with water heating loads, closer attention is paid to the lighting, appliances and plug load of the house. A new energy star rated microwave will use 30% less energy than a regular model. Moreso these smart homes have lighting fixtures and lights with pin-based compact fluorescent fixtures which plays a huge role in reducing the electric bill by up to 40%.
Bottom line
Many energy homes, apart from all the features we have mentioned earlier, do produce their own renewable energy systems such as wind power, photovoltaics, or even hydro, if there happens to be a stream nearby, which hugely slashes the overall price of your energy bills. However, if you don’t happen to have a river nearby, then the good old conservation method is still a noble and viable route to aply. As a note of consideration, before embarking on any renewable energy project, be sure that the space within the house is leak-proof and that your energy consumption is to the barest minimum.
